Mediabridge MWN-WAPR150Nv2 User Guide Bedienungsanleitung

MWN-WAPR150Nv2 1

MWN-WAPR150Nv2 5 Chapter 3 How to configure your computer’s Ethernet (LAN) connection. (Please note that most computers are

MWN-WAPR150Nv2 6 4. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “

MWN-WAPR150Nv2 7  Gateway: 192.168.8.1  DNS server: You should input the DNS server address provided by your ISP. Other

MWN-WAPR150Nv2 8 3. Right click “Local Area Connection” and select “Properties”. 4. Double click” Internet Protocol Versi

MWN-WAPR150Nv2 9 automatically”. Click “OK” to save the configurations. Or if you want to specify a Static IP Address for

MWN-WAPR150Nv2 10 3.2 Log in to the Router 1. To access the Router’s Web-based Utility, launch a web browser such as Inter

MWN-WAPR150Nv2 11 3.3 Fast Internet Access Two kinds of fast access methods are provided on the router’s web-based utility

MWN-WAPR150Nv2 12 default is “password” and you can change it whenever you want. 3.4 Default Wireless Settings Your Mediali

MWN-WAPR150Nv2 13  Gateway: Obtained from ISP, modem, or router.  DNS Server: Obtained from ISP, modem, or router.  A

MWN-WAPR150Nv2 14 4.2 WAN Settings Click “Advanced Settings” > “WAN Settings” to enter the following screen: PPPoE (aD

MWN-WAPR150Nv2 2 Copyright Statement is the registered trademark of Medialink Products, LLC. All the products and product names me

MWN-WAPR150Nv2 15 times. Otherwise, enter the minutes to be elapsed before you are disconnected from the Internet.  Con

MWN-WAPR150Nv2 16 will get a different IP Address. You do not need to enter any parameters in this mode, just Click “Apply”

MWN-WAPR150Nv2 17 L2TP  Mode: Shows your current connection mode.  L2TP Server Address: The IP address or domain name

MWN-WAPR150Nv2 18  LAN MAC Address: The Router’s LAN MAC Address, which is unchangeable.  IP Address: The Router’s LAN

MWN-WAPR150Nv2 19  MAC Address: The MAC Address to be registered with your Internet Service Provider.  Clone MAC Add

MWN-WAPR150Nv2 20 4.6 Traffic Statistics Traffic statistics is used to display the bandwidth that LAN devices have used.

MWN-WAPR150Nv2 21  Enable Bandwidth Control: enables or disables the internal IP bandwidth control. The default is

MWN-WAPR150Nv2 22 1. Enter 192.168.8.2 in the both IP address fields 2. Select upload in the Upload/Download field. 3

MWN-WAPR150Nv2 23 5. Click “Add to list” 6. Click “Apply” to finish the download rule settings. Example 2 Set the downloa

MWN-WAPR150Nv2 24 4.9 WAN Speed This page allows you to set the connection speed of the WAN port. It is not recommended t

MWN-WAPR150Nv2 3 Contents CHAPTER 1 PRODUCT INTRODUCTION ... 1 1.1 PACKAGE CONTENTS ...

MWN-WAPR150Nv2 25 Chapter 5 Wireless Settings 5.1 Wireless Basic Settings  Enable Wireless Function: Select to e

MWN-WAPR150Nv2 26 (from 1 to 11 or AutoSelect) of the wireless network. The best channel is the least used channel by your

MWN-WAPR150Nv2 27 Example: This example shows how to bridge two MWN-WAPR150Nv2 routers. First check the following settings:

MWN-WAPR150Nv2 28 2. Scroll down to the bottom of the page and click “Apply” after the MAC address is added. Connect the

MWN-WAPR150Nv2 29 5.2 Wireless Security Settings The Medialink router is secured by default using WPA-PSK with AES Algorith

MWN-WAPR150Nv2 30  WPS Settings: To enable or disable WPS function. The default is “Enable”.  WPS Mode: PBC (Push-Butto

MWN-WAPR150Nv2 31 these five characters \ , ' ; "  Key Renewal Interval: Set the key’s renewal period, which te

MWN-WAPR150Nv2 32  Default Key: Determines which Key will allow wireless clients to be accepted into the network.  WEP

MWN-WAPR150Nv2 33  MAC Address list: Shows the added MAC addresses. You can add or delete them.  Click “Apply” when f

MWN-WAPR150Nv2 34  DHCP Server: Check “Enable” to enable DHCP server.  IP Pool Start/End Address: Enter the range of I

MWN-WAPR150Nv2 4 5.2.2 WPA-PSK (WPA-PERSONAL) ... 30 5.2.3 WPA2-PSK (WPA2-PERSONAL) ...

MWN-WAPR150Nv2 35 Chapter 7 Virtual Server 7.1 Port Range Forwarding  Start/End Port: Enter the start/end port number wh

MWN-WAPR150Nv2 36 to enable your friends to access to these files on your computer. Suppose that your FTP server or your co

MWN-WAPR150Nv2 37 NOTE: If you set the service port of the virtual server as 80, you must set the Web management port on

MWN-WAPR150Nv2 38  Enable UPnP: Click the checkbox to enable the UPnP. Chapter 8 Security Settings 8.1 Client Filter Se

MWN-WAPR150Nv2 39 end time. The Time cannot cross over midnight.  Day(s): Select the day(s) to run the access policy. T

MWN-WAPR150Nv2 40  Filter mode: You can select “Forbid only” or “Permit Only”.  Access Policy: Select a number from the

MWN-WAPR150Nv2 41  Filter Mode: “Forbid only” is the only mode.  Access Policy: Select a number from the drop-down lis

MWN-WAPR150Nv2 42 NOTE: Enter only one domain name or keyword for each access policy. So, if you want to filter multip

MWN-WAPR150Nv2 43  IP Address: Specify the range of the Public IP addresses of the computers on the Internet for remote m

MWN-WAPR150Nv2 44 A static route is a pre-determined pathway that network information must travel to reach a specific host

MWN-WAPR150Nv2 5 10.6 REBOOT THE ROUTER ... 49 10.7 CHANGE USERNAME/PASSWORD ...

MWN-WAPR150Nv2 45 Chapter 10 System Tools 10.1 Time Settings This section is to configure the router’s system time. You can

MWN-WAPR150Nv2 46  Main features: 1. Most ISP connections provide a dynamic IP address and the DDNS is used to captu

MWN-WAPR150Nv2 47  Backup Settings: Click the Backup button to back up the router’s settings and select a path to save t

MWN-WAPR150Nv2 48 Click the “Restore” button to restore previous settings. 10.4 Restore to Factory Default This screen

MWN-WAPR150Nv2 49 WARNING: BE SURE TO USE A COMPUTER THAT IS CONNECTED TO THE ROUTER VIA ETHERNET TO ADJUST THE FIRMWARE.

MWN-WAPR150Nv2 50  Reboot the router: Click this button to reboot the router. 10.7 Change Username/Password This sectio

MWN-WAPR150Nv2 51  Refresh: Click this button to update the log.  Clear: Click this button to clear the currently show

MWN-WAPR150Nv2 52 Appendix 1 Glossary Channel: A distinct frequency range within the 2.4 GHz wavelength. There are 11

MWN-WAPR150Nv2 53  Supports hidden SSID function and MAC Address-based access control  Supports WMM to make your audio

MWN-WAPR150Nv2 54 3. The device is telling me that the password I am entering is incorrect. Make sure you are entering the

MWN-WAPR150Nv2 1 Chapter 1 Product Introduction Thank you for purchasing the Medialink Wireless 150N Router! This router i

MWN-WAPR150Nv2 55 3. Click “Wireless Network Configuration” and clear the corresponding wireless configuration file as sho

MWN-WAPR150Nv2 56 2. Click “Manage wireless networks” on the left side of the window. 3. Delete the corresponding configur

MWN-WAPR150Nv2 57 equipment generates uses and can radiate radio frequency energy and, if not installed and used in accorda

MWN-WAPR150Nv2 2 Back panel ports

MWN-WAPR150Nv2 3 Back panel port description

MWN-WAPR150Nv2 4 Chapter 2 Product Installation 1. Please use only the included power adapter to power your router. (NOTE